design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fm ? eee-78 ? 10 < d 0.05 sleeve 14 min. 3 min. l ? ? l < 1 6:l 1.5 l > 2 0:l 2.0 pressure relief 6.3 < + 5to 8 d 0.5 f 0.5 d 0.5 features low impedance (40 % to 70 % less than fc se ries) endurance : 2000 h to 7000 h at +105 c rohs directiv e compliant radial lead type series: fm type: a speci? cations category temp. range 40 c to +105 c rated w.v. range 6.3 v.dc to 50 v.dc nominal cap. range 2 2 f to 6800 ? capacitance tolerance 20 % (120 hz/+20 c) dc leak age cur rent i < 0.01 cv ( a) after 2 minutes tan w.v. 6.3 10 16 25 35 50 (max.) (120 hz/+20 c) tan 0.22 0.19 0.16 0.14 0.12 0.10 add 0.02 per 1000 f for prod ucts of 1 000 f or more. endurance after following life test with dc voltage and +105 ?? ? ripple current value applied. (the sum of dc and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 c, the capacitors shall meet the limits speci ed below. duration 5 to 6.3 : 2000 hours, 8 11.5 to 8 15: 3 000 hours 8 20 to 10 16 : 4000 hours, 10 20 to 12.5 20/ 16 20: 5 000 hours 12.5 2 5 to 12.5 35/ 16 25 : 7000 hours capacitance change 25 % of initial measured value (6.3 v to 10 v : 30 %) tan < 200 % of initial speci ed value dc leakag e current < initial speci ed value shelf life after storage for 1000 hours at +105 c 2 c with no voltage applied and then being stabilized at +20 c , capacitors shall meet the limits speci ed in endurance. (with voltage treatment) w.v.(v.dc) cap ( f) frequency (hz) 60 120 1 k 1 0 k 100 k 6.3 to 50 22 to 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1 000 0.65 0.75 0.90 0.98 1.00 1200 to 6800 0.75 0.80 0.95 1.00 1.00 frequency correction factor for ripple current body dia. d56.3810 12.5 16 body length l 12.5 to 25 30 to 40 lead dia. d0.50.50 .6 0.6 0.6 0.8 0.8 lead space f 2.0 2.5 3.5 5.0 5.0 7.5 attention not applic able for automotive di men sions in mm (not to scale) (unit : mm) 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fm ? eee-79 ? case size/impedance/ripple current w.v.(v.dc) 6.3 v to 35 v 50 v case size ( d l) imped ance ( /100 khz) ripple current (ma r.m.s./100 khz ) imped ance ( /100 khz) ripple current (ma r.m.s./100 khz) +20 c 10 ? +105 ? +20 ? 10 ? +105 ? 5 11 0.3 0 0 1 .000 280 0.340 1.130 250 6.3 11. 2 0.13 0 0.4 3 0 4 5 50.1400.460 405 8 11.5 0.056 0.168 950 0.061 0.183 870 8 15 0.041 0.123 1240 0.045 0.135 1140 8 20 0.030 0.090 1560 0.033 0.099 1430 10 12.5 0.038 0.114 1290 0.042 0.126 1170 10 16 0.026 0.078 1790 0.030 0.090 1650 10 20 0.019 0.057 2180 0.023 0.069 1890 10 25 0.018 0.054 2470 0.022 0.066 2150 12.5 20 0.018 0.045 2600 0.022 0.055 2260 12.5 25 0.015 0.038 3190 0.018 0.045 2660 12.5 30 0.013 0.033 3630 0.016 0.040 3160 12.5 35 0.012 0.030 3750 0.014 0.035 3270 16 20 0.017 0.043 3300 0.019 0.048 2870 16 25 0.014 0.035 3820 0.016 0.040 3320 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fm ? eee-80 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space long lead taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 6.3 150 5 11 280 0.300 2 000 0.5 2 .0 5.0 2.5 eeufm0j1 51( ) 200 2 000 330 6.3 11.2 455 0.1 30 2 000 0.5 2.5 5.0 2.5 eeufm0j3 31( ) 200 2 000 560 8 11.5 95 0 0.056 3000 0.6 3.5 5.0 eeufm0j5 61( ) 200 1 000 820 8 15 12 40 0.041 3000 0.6 3.5 5.0 eeufm0j821l( ) 200 1 000 1 000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 eeufm0j1 02( ) 200 500 1200 8 20 1560 0.030 4000 0.6 3.5 5.0 eeufm0j122l( ) 200 1 000 10 16 1790 0.026 4000 0.6 5.0 5.0 eeufm0j1 22( ) 200 500 1500 10 20 2180 0.019 5000 0.6 5.0 5.0 eeufm0j1 52( ) 200 500 2200 10 25 2470 0.018 5000 0.6 5.0 5.0 eeufm0j222l( ) 200 500 3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 eeufm0j332( ) 200 500 3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 eeufm0j3 92( ) 200 500 4700 12.5 30 36 30 0.013 7000 0.8 5.0 eeufm0j472l 100 5600 12.5 35 37 50 0.012 7000 0.8 5.0 eeufm0j562l 100 16 20 3300 0.017 5000 0.8 7.5 7.5 eeufm0j562s( ) 100 250 6800 16 25 3820 0.014 7000 0.8 7.5 7.5 eeufm0j682( ) 100 250 10 100 5 11 280 0.300 2 000 0.5 2 .0 5.0 2.5 eeufm1a101( ) 200 2 000 220 6.3 11.2 455 0.1 30 2 000 0.5 2.5 5.0 2.5 eeufm1a221( ) 200 2 000 470 8 11.5 95 0 0.056 3000 0.6 3.5 5.0 eeufm1a4 71( ) 200 1 000 680 8 15 1240 0.041 3000 0.6 3.5 5.0 eeufm1a681l( ) 200 1 000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 eeufm1a681( ) 200 500 1 000 8 20 1560 0.030 4000 0.6 3.5 5.0 eeufm1a102l( ) 200 1 000 10 16 1790 0.026 4000 0.6 5.0 5.0 eeufm1a1 02( ) 200 500 1200 10 20 2180 0.019 5000 0.6 5.0 5.0 eeufm1a1 22( ) 200 500 1500 10 25 2470 0.018 5000 0.6 5.0 5.0 eeufm1a152l( ) 200 500 2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 eeufm1a 222( ) 200 500 3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 eeufm1a332( ) 200 500 3900 12.5 30 36 30 0.013 7000 0.8 5.0 eeufm1a392l 100 16 20 3300 0.017 5000 0.8 7.5 7.5 eeufm1a392s( ) 100 250 4700 12.5 35 37 50 0.012 7000 0.8 5.0 eeufm1a472l 100 5600 16 25 3820 0.014 7000 0.8 7.5 7.5 eeufm1a5 62( ) 100 250 16 68 5 11 280 0.300 2 000 0.5 2 .0 5.0 2.5 eeufm1c6 80( ) 200 2 000 120 6.3 11.2 455 0.1 30 2 000 0.5 2.5 5.0 2.5 eeufm1c121( ) 200 2 000 330 8 11.5 95 0 0.056 3000 0.6 3.5 5.0 eeufm1c3 31( ) 200 1 000 470 8 15 1240 0.041 3000 0.6 3.5 5.0 eeufm1c471l( ) 200 1 000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 eeufm1c4 71( ) 200 500 680 8 20 1560 0.030 4000 0.6 3.5 5.0 eeufm1c681l( ) 200 1 000 10 16 1790 0.026 4000 0.6 5.0 5.0 eeufm1c6 81( ) 200 500 1 000 10 20 2180 0.0 19 5 000 0.6 5 .0 5.0 eeufm1c1 02( ) 200 500 1200 10 25 2470 0.018 5000 0.6 5.0 5.0 eeufm1c122l( ) 200 500 1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 eeufm1c152( ) 200 500 2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 eeufm1c2 22( ) 200 500 2700 12.5 30 36 30 0.013 7000 0.8 5.0 eeufm1c272l 100 16 20 3300 0.017 5000 0.8 7.5 7.5 eeufm1c272s( ) 100 250 3300 12.5 35 37 50 0.012 7000 0.8 5.0 eeufm1c332l 100 3900 16 25 3820 0.014 7000 0.8 7.5 7.5 eeufm1c3 92( ) 100 250 ?when requesting taped product, please put the letter "b" of "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fm ? eee-81 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space long lead taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 25 47 5 11 280 0.300 2 000 0.5 2 .0 5.0 2.5 eeufm1e470( ) 200 2 000 100 6.3 11.2 455 0.1 30 2 000 0.5 2.5 5.0 2.5 eeufm1e1 01( ) 200 2 000 220 8 11.5 95 0 0.056 3000 0.6 3.5 5.0 eeufm1e221( ) 200 1 000 330 8 15 1240 0.041 3000 0.6 3.5 5.0 eeufm1e331l( ) 200 1 000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 eeufm1e331( ) 200 500 470 8 20 1560 0.030 4000 0.6 3.5 5.0 eeufm1e471l( ) 200 1 000 10 16 1790 0.026 4000 0.6 5.0 5.0 eeufm1e471( ) 200 500 680 10 20 21 80 0.019 5000 0.6 5.0 5.0 eeufm1e681( ) 200 500 820 10 25 24 70 0.018 5000 0.6 5.0 5.0 eeufm1e821l( ) 200 500 1 000 12.5 20 2600 0.0 18 5 000 0.6 5 .0 5.0 eeufm1e1 02( ) 200 500 1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 eeufm1e152( ) 200 500 1800 12.5 30 36 30 0.013 7000 0.8 5.0 eeufm1e182l 100 16 20 3300 0.017 5000 0.8 7.5 7.5 eeufm1e182s( ) 100 250 2200 12.5 35 37 50 0.012 7000 0.8 5.0 eeufm1e222l 100 2700 16 25 3820 0.0 14 7 000 0.8 7.5 7.5 eeufm1e 272( ) 100 250 35 33 5 11 280 0.300 2 000 0.5 2 .0 5.0 2.5 eeufm1v330( ) 200 2 000 68 6.3 11.2 455 0.1 30 2 000 0.5 2.5 5.0 2.5 eeufm1v6 80( ) 200 2 000 150 8 11.5 95 0 0.056 3000 0.6 3.5 5.0 eeufm1v1 51( ) 200 1 000 220 8 15 1240 0.041 3000 0.6 3.5 5.0 eeufm1v221l( ) 200 1 000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 eeufm1v2 21( ) 200 500 330 8 20 1560 0.030 4000 0.6 3.5 5.0 eeufm1v331l( ) 200 1 000 10 16 1790 0.026 4000 0.6 5.0 5.0 eeufm1v331( ) 200 500 470 10 20 21 80 0.019 5000 0.6 5.0 5.0 eeufm1v471( ) 200 500 560 10 25 24 70 0.018 5000 0.6 5.0 5.0 eeufm1v561l( ) 200 500 680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 eeufm1v6 81( ) 200 500 1 000 12.5 25 3190 0.0 15 7 000 0.6 5 .0 5.0 eeufm1v1 02( ) 200 500 1200 12.5 30 36 30 0.013 7000 0.8 5.0 eeufm1v122l 100 16 20 3300 0.017 5000 0.8 7.5 7.5 eeufm1v122s( ) 100 250 1500 12.5 35 37 50 0.012 7000 0.8 5.0 eeufm1v152l 100 1800 16 25 3820 0.014 7000 0.8 7.5 7.5 eeufm1v182( ) 100 250 50 22 5 11 250 0.340 2 000 0.5 2 .0 5.0 2.5 eeufm1h2 20( ) 200 2 000 56 6.3 11.2 405 0.1 40 2 000 0.5 2.5 5.0 2.5 eeufm1h5 60( ) 200 2 000 100 8 11.5 87 0 0.061 3000 0.6 3.5 5.0 eeufm1h101( ) 200 1 000 120 8 15 11 40 0.045 3000 0.6 3.5 5.0 eeufm1h121l( ) 200 1 000 150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 eeufm1h1 51( ) 200 500 180 8 20 14 30 0.033 4000 0.6 3.5 5.0 eeufm1h181l( ) 200 1 000 220 10 16 1650 0.030 4 000 0.6 5 .0 5.0 eeufm1h221( ) 200 500 270 10 20 1890 0.023 5000 0.6 5.0 5.0 eeufm1h271( ) 200 500 330 10 25 21 50 0.022 5000 0.6 5.0 5.0 eeufm1h331l( ) 200 500 470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 eeufm1h4 71( ) 200 500 560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 eeufm1h5 61( ) 200 500 680 12.5 30 3160 0.016 7000 0.8 5.0 eeufm1h681l 100 820 12.5 35 32 70 0.014 7000 0.8 5.0 eeufm1h821l 100 16 20 2870 0.019 5000 0.8 7.5 7.5 eeufm1h821s( ) 100 250 1 000 16 25 3320 0.016 7000 0.8 7.5 7.5 eeufm1h1 02( ) 100 250 ?when requesting taped product, please put the letter "b" of "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? 00 nov. 2012
|
